宝塔linux面板磁盘挂载脚本
| Auto mount partition disk to $setup_path
+———————————————————————-
“
#数据盘自动分区
fdiskP(){
for i
|
+———————————————————————- | Auto mount partition disk to $setup_path +———————————————————————- “ #数据盘自动分区 fdiskP(){ for i in `cat /proc/partitions|grep -v name|grep -v ram|awk ‘{print $4}’|grep -v ‘^$’|grep -v ‘[0-9]$’|grep -v ‘vda’|grep -v ‘xvda’|grep -v ‘sda’|grep -e ‘vd’ -e ‘sd’ -e ‘xvd’`; do #判断指定目录是否被挂载 isR=`df -P|grep $setup_path` if [ “$isR” != “” ];then echo “Error: The $setup_path directory has been mounted.” return; fi isM=`df -P|grep ‘/dev/${i}1’` if [ “$isM” != “” ];then echo “/dev/${i}1 has been mounted.” continue; fi #判断是否存在未分区磁盘 isP=`fdisk -l /dev/$i |grep -v ‘bytes’|grep “$i[1-9]*”` if [ “$isP” = “” ];then #开始分区 fdisk -S 56 /dev/$i > /etc/fstab mount -a df -h fi else #判断是否存在Windows磁盘分区 isN=`fdisk -l /dev/$i|grep -v ‘bytes’|grep -v “NTFS”|grep -v “FAT32″` if [ “$isN” = “” ];then echo ‘Warning: The Windows partition was detected. For your data security, Mount manually.’; return; fi #挂载已有分区 checkR=`df -P|grep “/dev/$i”` if [ “$checkR” = “” ];then mkdir $setup_path sed -i “/\/dev\/${i}1/d” /etc/fstab echo “/dev/${i}1 $setup_path ext4 defaults 0 0” >> /etc/fstab mount -a df -h fi #清理不可写分区 echo ‘True’ > $setup_path/checkD.pl if [ ! -f $setup_path/checkD.pl ];then sed -i “/\/dev\/${i}1/d” /etc/fstab mount -a df -h else rm -f $setup_path/checkD.pl fi fi done } stop_service(){ /etc/init.d/bt stop if [ -f “/etc/init.d/nginx” ]; then /etc/init.d/nginx stop > /dev/null 2>&1 fi if [ -f “/etc/init.d/httpd” ]; then /etc/init.d/httpd stop > /dev/null 2>&1 fi if [ -f “/etc/init.d/mysqld” ]; then /etc/init.d/mysqld stop > /dev/null 2>&1 fi if [ -f “/etc/init.d/pure-ftpd” ]; then /etc/init.d/pure-ftpd stop > /dev/null 2>&1 fi if [ -f “/etc/init.d/tomcat” ]; then /etc/init.d/tomcat stop > /dev/null 2>&1 fi if [ -f “/etc/init.d/redis” ]; then /etc/init.d/redis stop > /dev/null 2>&1 fi if [ -f “/etc/init.d/memcached” ]; then /etc/init.d/memcached stop > /dev/null 2>&1 fi if [ -f “/www/server/panel/data/502Task.pl” ]; then rm -f /www/server/panel/data/502Task.pl if [ -f “/etc/init.d/php-fpm-52” ]; then /etc/init.d/php-fpm-52 stop > /dev/null 2>&1 fi if [ -f “/etc/init.d/php-fpm-53” ]; then /etc/init.d/php-fpm-53 stop > /dev/null 2>&1 fi if [ -f “/etc/init.d/php-fpm-54” ]; then /etc/init.d/php-fpm-54 stop > /dev/null 2>&1 fi if [ -f “/etc/init.d/php-fpm-55” ]; then /etc/init.d/php-fpm-55 stop > /dev/null 2>&1 fi if [ -f “/etc/init.d/php-fpm-56” ]; then /etc/init.d/php-fpm-56 stop > /dev/null 2>&1 fi if [ -f “/etc/init.d/php-fpm-70” ]; then /etc/init.d/php-fpm-70 stop > /dev/null 2>&1 fi if [ -f “/etc/init.d/php-fpm-71” ]; then /etc/init.d/php-fpm-71 stop > /dev/null 2>&1 fi fi } start_service() { /etc/init.d/bt start if [ -f “/etc/init.d/nginx” ]; then /etc/init.d/nginx start > /dev/null 2>&1 fi if [ -f “/etc/init.d/httpd” ]; then /etc/init.d/httpd start > /dev/null 2>&1 fi if [ -f “/etc/init.d/mysqld” ]; then /etc/init.d/mysqld start > /dev/null 2>&1 fi if [ -f “/etc/init.d/pure-ftpd” ]; then /etc/init.d/pure-ftpd start > /dev/null 2>&1 fi if [ -f “/etc/init.d/tomcat” ]; then /etc/init.d/tomcat start > /dev/null 2>&1 fi if [ -f “/etc/init.d/redis” ]; then /etc/init.d/redis start > /dev/null 2>&1 fi if [ -f “/etc/init.d/memcached” ]; then /etc/init.d/memcached start > /dev/null 2>&1 fi if [ -f “/etc/init.d/php-fpm-52” ]; then /etc/init.d/php-fpm-52 start > /dev/null 2>&1 fi if [ -f “/etc/init.d/php-fpm-53” ]; then /etc/init.d/php-fpm-53 start > /dev/null 2>&1 fi if [ -f “/etc/init.d/php-fpm-54” ]; then /etc/init.d/php-fpm-54 start > /dev/null 2>&1 fi if [ -f “/etc/init.d/php-fpm-55” ]; then /etc/init.d/php-fpm-55 start > /dev/null 2>&1 fi if [ -f “/etc/init.d/php-fpm-56” ]; then /etc/init.d/php-fpm-56 start > /dev/null 2>&1 fi if [ -f “/etc/init.d/php-fpm-70” ]; then /etc/init.d/php-fpm-70 start > /dev/null 2>&1 fi if [ -f “/etc/init.d/php-fpm-71” ]; then /etc/init.d/php-fpm-71 start > /dev/null 2>&1 fi echo “True” > /www/server/panel/data/502Task.pl } while [ “$go” != ‘y’ ] && [ “$go” != ‘n’ ] do read -p “Do you want to try to mount the data disk to the $setup_path directory?(y/n): ” go; done if [ “$go” = ‘n’ ];then echo -e “Bye-bye” exit; fi if [ -f “/etc/init.d/bt” ] && [ -f “/www/server/panel/main.pyc” ]; then disk=`cat /proc/partitions|grep -v name|grep -v ram|awk ‘{print $4}’|grep -v ‘^$’|grep -v ‘[0-9]$’|grep -v ‘vda’|grep -v ‘xvda’|grep -v ‘sda’|grep -e ‘vd’ -e ‘sd’ -e ‘xvd’` diskFree=`cat /proc/partitions |grep ${disk}|awk ‘{print $3}’` wwwUse=`du -sh -k /www|awk ‘{print $1}’` if [ “${diskFree}” -lt “${wwwUse}” ]; then echo -e “Sorry,your data disk is too small,can’t coxpy to the ” echo -e “对不起，你的数据盘太小,无法迁移www目录数据到此数据盘” exit; else echo -e “” echo -e “stop bt-service” echo -e “停止宝塔服务” echo -e “” sleep 3 stop_service echo -e “” mv /www /bt-backup echo -e “disk partition…” echo -e “磁盘分区…” sleep 2 echo -e “” fdiskP echo -e “” echo -e “move disk…” echo -e “迁移数据中…” \cp -r -p -a /bt-backup/* /www echo -e “” echo -e “Done” echo -e “迁移完成” echo -e “” echo -e “start bt-service” echo -e “启动宝塔服务” echo -e “” start_service fi else fdiskP echo -e “” echo -e “Done” echo -e “挂载成功” fi 本条目发布于2018年8月21日。属于工具、常见问题、知识库分类linux面板，被贴了 宝塔linux面板、宝塔磁盘挂载、宝塔磁盘挂载脚本、宝塔面板 标签。作者是cheshirex。 （编辑：92站长网） 【声明】本站内容均来自网络，其相关言论仅代表作者个人观点，不代表本站立场。若无意侵犯到您的权利，请及时与联系站长删除相关内容! |
